configurazione bligny
Precipitation sensor
15189 without anti-bounce electronic
Supplier: Lambrecht Info

Supplier: Siap + Micros Info
LCJ Capteur CV7-L

Supplier: Info
Solar panel
Supplier: UFLEX Info

Supplier: RS Info

The measuring system provides the combination of a mechanical tipping bucket rain gauge, a composite sensor (T-P-RH), an ultrasonic anemometer, all third parties, and a remote station completed under the Paradigm.

measuring instruments  includes  model “15189 produced by lambrecth with tipping bucket in stainless steal WMO standard.Termo hygrometer t026 TTEPRH produced by siam+ micros is a combined sensor for measuring air temperature and relative humidity. Temperature measurement is taken using a platinum Pt100 resistance thermometer with a response curve, compliant with the DIN 43760 Class 1/3 standard and 4-wire connection.The humidity measurement is obtained using a laser-cut capacitive polymer transducer connected to an electronic signal conditioning board.the anemometer LCJ captures CV7-l ultrasonic sonsor measures wind in m/s

the station includes  an  Electronic board (ACROboard “Station” v04),  the  latest release. This card is dedicated  to the collection functions and data transmission (via GPRS, with internal antenna)  the supply management of energy to the components (and charging the buffer battery).

Power is supplied by a 20W Solar Panel, combined with a 12V buffer battery which provides 12 Ah.

configurazione bligny

You can use the firmware to manage the electronic side of the apparatuses, while the basic implementation is fundamental to run the system


Environment: rural, open field
Latitude: average
Aggression: normal
Mechanical stress: normal
Temperature Excursion: -15° + 40°
Network coverage: GPRS mobile network, strong and stable signal


Type: Outdoor
Energy source: Solar panel
Battery: 12V e 12Ah
Backup energy source: Battery 2N-AIR
Primary connectivity: GPRS
Secondary connectivity: Radio Satellitare a bassa frequenza

For this configuration theDIY KIT is available

The DIY kit contains all the material and the documentation necessary for the realization in own and on-site installation of your monitoring station ACRONET. End user remains only the task of assembling the individual components and place them in a “work” according to the types of fasteners indicated. For configurations connected to the infrastructure via wireless GPRS simply insert a SIM card enabled for GPRS data traffic (2G). From that moment all data read and sent according to the file will be sent to the infrastructure set-up and remains available to portal ACRONETWORK.ORG.